Rev. 1.00
(pL + pH x 256) = 3 (pL=3, pH=0)
cn=53
fn=81
m=48
none
This command encodes and prints Aztec barcode symbol data saved in the
storage area..
▪ In standard mode, this command is available only when printer is at the
beginning of a line or the printer buffer is empty
▪ A symbol exceeding the printing area in size can not be printed.
▪ In standard mode, the paper feed amount set by the paper feed setting
command does not affect printing of the symbol. The printing position
returns to the left side of the printable area after printing the symbol.
▪ In page mode, the printer stores the symbol data in the print buffer without
executing actual printing.
▪ Input:
0x1d 0x28 0x6b 0x03 0x00 0x35 0x41 0x03
0x1d 0x28 0x6b 0x03 0x00 0x35 0x42 0x02
0x1d 0x28 0x6b 0x03 0x00 0x35 0x43 0x01
0x1d 0x28 0x6b 0x0b 0x00 0x35 0x50 0x30 0x31 0x32 0x33 0x34 0x35
0x36 0x37 0x38
0x1d 0x28 0x6b 0x03 0x00 0x35 0x51 0x30
▪ Output:
