Rev. 1.00
(pL + pH x 256) = 3 (pL=3, pH=0)
cn=51
fn=81
m=48
Encodes and prints DATAMATRIX symbol data saved in the storage area
▪ This function is used in regular mode when the printer is at the first line or
no data is present in the printer buffer.
▪ If the size of any one symbol is larger than the print area, printing cannot
be done.
▪ If any of the following errors is present in the symbol storage area, printing
cannot be done:
- There is no data. (Function 380 cannot be executed)
- The number of alphanumeric characters exceeds 2334.
- The number of 8bit byte characters exceeds 1558.
- The number of numeric characters exceeds 3116.
▪ DATAMATRIX uses ECC 200 symbols.
▪ In the detection and correction of errors, DATAMATRIX uses the Reed-
Solomon algorithm.
▪ The following data is automatically added during the encoding process:
- Position pattern
- Error correction code text
- Mode separator
- Pad code text
▪ During symbol printing, the printer mode has no effect (bold, underline,
reverse direction, contrast).
▪ In regular mode, this command supplies enough paper required for
symbol printing. If the paper supply is not sufficient, the paper supply
command is executed. When printing, the printing position is to the left of
the print area. After symbol printing, the printer returns to the start
position of the line, and the buffer is emptied.
▪ Input:
0x1d 0x28 0x6b 0x03 0x00 0x33 0x43 0x05
0x1d 0x28 0x6b 0x1b 0x00 0x33 0x50 0x30
0x5a 0x51 0x31 0x31 0x30 0x5f 0x5a 0x65 0x62 0x72
0x61 0x20 0x54 0x65 0x63 0x68 0x6e 0x6f 0x6c 0x6f
0x67 0x69 0x65 0x73
0x1d 0x28 0x6b 0x03 0x00 0x33 0x51 0x30
0x0a
