Rev. 1.00
▪ The data stored to the symbol storage area by this command is executed
by Function 481. The data remains reserved in the symbol storage area.
▪ Encodes a Global Trade Item Number(GTIN) and AI’s(Application
Identifiers)
▪ GS1 DataBar holds a 14-digit number.
▪ GS1 DataBar can carry GTIN-12, GTIN-13 & GTIN-14
▪ Numeric character(0-9) – No alpha numeric, no special characters.
Fiex data length – 14digits(encodes 13 with an implied check digit)
AI(01) is implied.
Limeted to GTIN-12, 13 and GTIN-14 with indicator digit 1 only(no other
number can be used as an indicator digit)
▪ The setting of this command remains effective until ESC @, printer reset or
power cycling is executed.
(pL + pH x 256) = 3 (pL=3, pH=0)
cn=52
fn=81
m=48
none
This command encodes and prints GS1 DataBar symbol data saved in the
storage area..
▪ In standard mode, this command is available only when printer is at the
beginning of a line or the printer buffer is empty
▪ A symbol exceeding the printing area in size can not be printed.
▪ In standard mode, the paper feed amount set by the paper feed setting
command does not affect printing of the symbol. The printing position
returns to the left side of the printable area after printing the symbol.
▪ In page mode, the printer stores the symbol data in the print buffer without
executing actual printing.
▪ Input:
0x1d 0x28 0x6b 0x03 0x00 0x34 0x41 0x32
0x1d 0x28 0x6b 0x03 0x00 0x34 0x42 0x02 0x02
0x1d 0x28 0x6b 0x03 0x00 0x34 0x43 0x22
0x1d 0x28 0x6b 0x03 0x00 0x34 0x44 0x32
0x1d 0x28 0x6b 0x03 0x00 0x34 0x46 0x02
0x1d 0x28 0x6b 0x25 0x00 0x34 0x50 0x30 0x31 0x32 0x33 0x34 0x35
0x36 0x37 0x38 0x39 0x30 0x31 0x7C 0x74 0x68 0x69 0x73 0x20 0x69
0x73 0x20 0x63 0x6F 0x6D 0x70 0x6F 0x73 0x69 0x74 0x65 0x20 0x69
0x6E 0x66 0x6F
0x1d 0x28 0x6b 0x03 0x00 0x34 0x51 0x30
