A SERVICE OF

logo

3–4
SCANTEAM 3400PDF User’s Guide
Wake Up Pulse Selection
10
25
Transmission Rate Selection
40
80
120
150
200
300
Enable
Disable
This programming selection sets the transmission rate from 10 ips (inches per
second) to300 ipsif thescanner isin WandEmulation mode. Programmingthe
transmission rate causes the data to be sent at the specified rate. The
programmed transmission rate must be compatible with the device receiving
the bar code data. Default = 25 ips (inches per second).
This selection provides a wake up" pulse on the sync line from the scanner to
a portable terminal. This feature extends battery life of the portable terminal by
wakingupthe terminalonlywhendata isreadytobesent. Bar codedatafollows
the wake up pulse after a 0.2 second delay. Default = Disable.