A SERVICE OF

logo

2–12
SCANTEAM 3400PDF User’s Guide
600
1200
2400
4800
9600
19200
38400
Default All Serial Communication Settings
Enable
Disable
CTS Check Selection
Baud Rate Selection
This selection allows you to select the software programming feature that
checksfor aCTSsignal, ifyour applicationdoesnot havea CTSI/Oline. Default
= Disable.
This selection sets the baud rate from 600 bits per second to 38,400 bits per
second. Programming baud rate causes the data to be sent at the specified
rate. The host terminal must be set up for the same baud rate as the scanner,
to ensure reliable communication. Default = 9600 bps.