8-4 SDC755A
8 • Troubleshooting
Printing Problems
Machine won't print
Machine is in seal-only mode
This mode disables printing. Press Home to return to Home screen
and resume printing.
Digital meter stamp is incomplete or streaked; poor print quality
Print nozzles clogged
IMPORTANT: Always ensure that your prints are clear
and complete. Poor prints may be rejected by your Postal
Authority. If you notice missing lines in the print as shown
in the illustration, perform a printhead purge as described
on page 7-14 of this guide.
The print nozzles may be clogged. Perform a print purge in an effort
to fix the problem see Chapter 7 Maintenance.
If printer maintenance fails to correct the problem, call your machine
supplier. You may have to replace the printhead.
The indicia above is a black and white representation
of the approved Red indicia. Only Red approved ink
should be used in the machine.
