6-17SDC755A
6 • System Options
Distributor Settings
This option allows you to modify the phone connection parameters
that your machine uses to call to the Data Centre. A brief description
of each parameter is provided on the next page.
CAUTION: Do not change these parameters
unless directed to do so by a representative of
your machine supplier.
Access the Distributor Settings
1. Press Options.
2. Press Page Down, if necessary.
3. Select "Data Centre Options".
4. Select "Distributor Settings".
5. Select the parameter you want to modify from the list appearing
in the display. Use Page Down if needed to access your choice.
6. A warning message displays that reminds you that entering a
wrong value may result in errors connecting to the Data Centre.
If you want to continue, press "Continue"; otherwise, press the C
key.
7. Key in a new entry for that parameter (some entries may require
alpha-numeric characters).
• To modify the existing parameter, select “Edit Options”.
You can then scroll left or right to insert a character within
the existing string. Select “Enter” when done.
• To restore default settings, select “Restore Defaults”.
8. When finished, either select "Restore Default" (if you made a
mistake or changed your mind) or "OK" (if you are satisfied with
your new entry).
9. If you have changed a parameter, a message confirming the new
setting displays.
10. Select "OK" when done.
11. Press Home to return to the home screen.
