Departmental Switch Model DS-16B Hardware Reference Manual
Switch Management
Temperature Pressing <Enter> while Temperature is selected, displays:
Using the <Up> or <Down> buttons, the user can toggle between Centigrade
(default) and Fahrenheit temperature values.
The numbered temperature sensor locations on the motherboard,
shown in Figure 3-3, correspond to the temperature in the display.
Sensor number 1 corresponds to the first temperature, 36, sensor
number two corresponds to the second temperature, 34, and so forth.
The temperature readings are shown at a rate of one reading per
second on the front panel. Readings obtained during a Telnet session
are single reading made at command execution.
Temperature:
36 34 37 36 35
Figure 3-3 Temperature Sensor Approximate Locations on Motherboard
1
2
3
4
Rear of switch
5
Front
