DS-16B Switch Menus
Switch Management
Port Enable Pressing <Enter> while the Port Enable message is displayed opens
a submenu where you select the port.
Pressing <Enter> while the selected port is displayed, enables the
selected port. The LED associated with selected port changes from
amber to green indicating the port has been enabled. When FL_Ports
are enabled, the port initializes the loop attempting to be the master.
Close Telnet Session
Reboot Pressing <Enter> while the
Reboot message is displayed causes the
switch to reboot immediately.
Rebooting the switch causes it to immediately exit all current
processes and states, and start the POST process. Exercise caution
using the reboot command on a switch connected to the Fabric.
Pressing <Enter> while the screen above is selected, displays:
Selecting
Yes causes the switch to immediately reboot. Selecting No or
pressing <Tab/Esc> exits this function.
Operation Menu:
Port Enable
Port Enable
Accept? Yes No
Operation Menu:
Reboot
Reboot
Accept? Yes No
