DS-16B Switch Menus
Switch Management
The default subnet mask value is none. Refer to the network
administrator for the appropriate subnet mask.
Enter the switch’s subnet address by using <Up> and <Down> to
increment or decrement the displayed value. The numbers with the
underline cursor is the group to modify.
Fibre Channel IP
Address
Pressing <Enter> while
Fibre Channel IP address is selected,
displays:
The default Fibre Channel IP address is
0.0.0.0, as shown in the
example. Enter a valid IP address.
To update the Fibre Channel’s IP address
1. Use <Up> and <Down> to increment or decrement the displayed
value. The underlined cursor indicates the numbers to modify.
2. After entering a number, press <Tab/Esc> to move the cursor to
modify the next field.
3. After setting the Fibre Channel’s IP address, pressing <Enter>
stores the value.
CAUTION
!
The Fibre Channel IP address should NOT be set to the same
address as the Ethernet IP address -- two different addresses are
required.
Fibre Channel
Subnetmask
Pressing <Enter> while
Fibre Channel Subnetmask is selected,
displays:
The default subnetmask value is none, as shown in the example.
Consult your network administrator for the appropriate subnetmask.
Enter the switch’s Fiber Channel Subnetmask by using <Up> and
<Down> to increment or decrement the displayed value.
Fibre Channel IP address:
0.
0. 0. 0
Fibre Channel Subnetmask
none
