DS-16B Switch Menus
Switch Management
R_A_TOV Pressing <Enter> while R_A_TOV is selected, displays:
Resource Allocation Time Out Value (R_A_TOV) is adjustable in
1-second increments using front panel controls, but its value is
displayed in milliseconds. This variable works with the variable
E_D_TOV to determine the switch’s actions when presented with an
error condition. Allocated circuit resources with detected errors are
not released until the time value has expired. If the condition is
resolved prior to the timing out, the internal time out clock resets and
waits for the next error condition.
The range is 1 to 120 seconds.
The set value must be larger than the set value for the Error Detect Time Out
Value.
E_D_TOV Pressing <Enter> while E_D_TOV is selected, displays:
E_D_TOV (Error Detect Time Out Value) is adjustable in 1-second
increments using the front panel controls, but its value is displayed in
milliseconds.
Use the flashSet command during a Telnet session to set the E_D_TOV or
R_A_TOV value (in milliseconds) for values other than whole seconds.
This timer is used to flag a potential error condition when an
expected response is not received (an acknowledgment or reply in
response to packet receipt, for example) within the set time limit. If
the time for an expected response exceeds the set value, then an error
condition is met.
The range is 1 to 60 seconds.
The set value must be less than the set value for the Resource Allocation Time
Out Value.
R_A_TOV:
10000
E_D_TOV:
2000
