Command
History
Version Description
9.2.(1.0) Introduced on the Z9500 switch.
9.3.0.0 Introduced on the Z9000 switch.
Usage
Information
The following table illustrates the fields displayed in the output of this command:
Field Description
Link-bundle trigger threshold Percentage value of link-bundle
bandwidth that serves as the threshold
for marking a link bundle as being
overutilized, triggering link-bundle
monitoring, and generating an SNMP
alarm.
Slot Slot number of a Z9500 line card.
npuUnit Network processing unit (NPU) ID
number of a HiGig link bundle/port-
channel.
hg-port-channel Port-channel number of a HiGig link
bundle.
Utilization (In Percent) Percentage of total bandwidth usage
by the traffic transmitted on the HiGig
link bundle.
Alarm State Indicates whether an alarm has been
generated if uneven traffic distribution
occurs in a HiGig link bundle. Possible
values are Active and Inactive.
Interface Member interface of the specified
HiGig link bundle/port channel in the
format:
slot-id/npu-id:hghigig-port-number
Utilization (In Percent) Percentage of total link-bundle
bandwidth used on each member link.
Example
Dell# show hg-link-bundle-distribution slot 0 npuUnit 2 hg-
port-channel 0
hg-link-bundle trigger threshold - 60
Slot 0 npuUnit 2 hg-port-channel-0 Utilization [In Percent] -
0 Alarm State - Inactive
Interface Utilization [In Percent]
0/2:hg0 10
0/2:hg1 10
0/2:hg2 10
0/2:hg3 10
910
Interfaces
