switchport mode private-vlan — sets PVLAN mode of the selected port.
show interfaces private-vlan
Display type and status of PVLAN interfaces.
Z9500
Syntax
show interfaces private-vlan [interface interface]
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface followed by the
interface type and slot/port numbers or port-channel
number to specify the port(s) for which you want to display
PVLAN information. The range of Z9500 slot IDs is 0 to 2.
Enter only a slot ID to display the PVLAN status for all ports
on a Z9500 line card. The valid values are:
• port-channel port-channel-number
• tengigabitethernet [slot-id | slot/port]
• fortygigE [slot-id | slot/port]
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
Usage
Information
This command has two types of display — a list of all PVLAN interfaces or for a
specific interface. Examples of both types of output are shown below.
1450
Private VLAN (PVLAN)
