description
Enter a description of the BGP routing protocol.
Z9500
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the BGP protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER BGP
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Related
Commands
router bgp – Enter ROUTER mode on the switch.
distance bgp
Configure three administrative distances for routes.
Z9500
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-
distance
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is 1 to 255. The default is 20.
internal-
distance
Enter a number to assign to routes learned from a router
within the AS. The range is 1 to 255. The default is 200.
local-distance Enter a number to assign to routes learned from networks
listed in the network command. The range is 1 to 255. The
default is
200.
534
Border Gateway Protocol
