2-51
Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference
OL-7029-01
Chapter 2 Content Switching Module with SSL Commands
set ip dscp (policy submode)
set ip dscp (policy submode)
To mark packets that match the policy with a DSCP value, use the set ip dscp command in the SLB policy
configuration submode. To stop marking packets, use the no form of this command.
set ip dscp dscp-value
no set ip dscp
Syntax Description
Defaults The default is that the CSM does not store DSCP values.
Command Modes SLB policy configuration submode
Command History
Examples This example shows how to mark packets to match a policy named policy_content:
Cat6k-2(config-module-csm)# policy policy_content
Cat6k-2(config-slb-policy)# set ip dscp 22
Related Commands policy
show module csm owner
dscp-value The range is from 0 to 63.
Release Modification
CSM release 1.1(1) This command was introduced.
CSM-S release 1.1(1) This command was introduced.
