49-3
Software Configuration Guide—Release 15.0(2)SG
OL-23818-01
Chapter 49 Port Unicast and Multicast Flood Blocking
Configuring Port Blocking
Broadcast Suppression Level: 100
Multicast Suppression Level: 100
Unicast Suppression Level: 100
Resuming Normal Forwarding on a Port
To resume normal forwarding on a port, perform this task:
Command Purpose
Step 1
Switch# configure terminal
Enters global configuration mode.
Step 2
Switch(config)# interface
interface-id
Enters interface configuration mode and enter the type and number of
the switch port interface (GigabitEthernet1/1).
Step 3
Switch(config-if)# no switchport
block multicast
Enables unknown multicast flooding to the port.
Step 4
Switch(config-if)# no switchport
block unicast
Enables unknown unicast flooding to the port.
Step 5
Switch(config)# end
Returns to privileged EXEC mode.
Step 6
Switch# show interface interface-id
switchport
Verifies your entry.
Step 7
Switch# copy running-config
startup-config
(Optional) Saves your entries in the configuration file.
