48-3
Catalyst 4500 Switch Software Configuration Guide
OL-23818-01
Chapter 48 Support for IPv6
About IPv6
You can find information about these features at this location:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
DHCP
The following DHCP features are supported for IPv6 on the Catalyst 4500 series switch:
• Relay agent
• Relay agent notification for prefix delegation
• Reload persistent interface ID option
• Ethernet remote ID option
• Stateless auto-configuration
You can find information about these features at this location:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-dhcp.html
Security
The following security features are supported for IPv6 on the Catalyst 4500 series switch:
• Secure Shell (SSH) support over IPv6
• Traffic filters
• standard access control lists (ACL)
• extended access control lists
• ACL accounting
• ACL addressing
• ACL DSCP
• ACL flags
• ACL flows
• ACL fragments
• ACL ICMP codes
• ACL logging
• ACL protocols
You can find information about these features at this location:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-sec_trfltr_fw.html
QoS
The following QoS features are supported for IPv6 on the Catalyst 4500 series switch:
• MQC packet classification
• MQC traffic shaping
