Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key
A-193 41-001343-02 REV04 – 05.2014
Configurable Display for Blank BLF/List Softkeys
Ring Splash Settings
Note:
Applicable to the 6735i, 6737i, 6755i, 6757i, and 6757i CT IP Phones only.
Parameter–
keys noname hidden
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description If this parameter is set to “0” (disabled) then a series of question marks will be displayed on
the screen indicating blank BLF/List softkeys.
If this parameter is set to “1” (enabled) then the series of question marks will be hidden and
nothing will be shown on the screen beside the affected softkeys.
Format String
Default value 0
Range 0-1
0 (disabled)
1 (enabled)
Example keys noname hidden: 1
Parameter –
play a ring splash
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables or disables the playing of a short ring splash when there is an incoming call on
a BLF-monitored extension.
Format Boolean
Default Value 0 (Disabled)
Range 0 - 2
0 (Disabled)
1 (Enabled for idle state only)
2 (Enabled for idle state and active call state)
Notes:
• This global parameter is not dynamic. Changes to this parameter will take effect only
after the phone has been rebooted.
• Playing a BLF ring splash while in an active call state (i.e. defining the parameter as
“2”) is only available to the 6739i, 6755i, 6757i, and 6757i CT IP phones.
Example play a ring splash: 2
