A SERVICE OF

logo

Operational Features
5-214 41-001343-02 REV04 – 05.2014
Configuring CFWD via the IP Phone UI (6739i)
If you enable/disable CFWD using the configuration files or the Aastra Web UI, you can use the CFWD screens that dis-
play to the . You can access the CFWD parameters by pressing a configured CFWD key (if previously configured) OR by
pressing Options->Call Forward on the phone’s front panel.
The following procedure assumes you have already configured a CFWD key AND assumes there are three accounts con-
figured on the phone.
Notes:
If there is no CFWD key configured on the phone or it is removed, you can still enable CFWD via the at the path
Options->Call Forward.
If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if
the mode was set to “Phone”.
Using the Aastra Web UI, if you change the CFWD key mode to “Phone”, all accounts synchronize to the current set-
ting of Account 1..