Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module Key/Hard Key Parameters
41-001343-02 REV04 – 05.2014 A-184
Parameter–
hardkeyN value
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description The value you would like to assign to the hard key you are configuring. The “hardkeyN
value” parameter can be set for the following key types only:
• speeddial (you can enter a speeddial number for this field; optionally, you can also
enter a prefix for the speeddial value to allow the phone to dial the prefix after you press
the speeddial programmable key; you then enter the rest of the number from the key-
pad on the phone).
• blf
• sprecode
• xml
• park
• pickup
• blfxfer
• speeddialxfer
• speeddialconf
• paging
Notes:
• For speeddial the value is the phone number, extension, or prefix number to enter for
the key.
• For line the value is optional; for example L4.
• For blf the value is the extension you want to monitor.
• For sprecode the value is dependent on services offered by server.
• For xml you can specify a URI to use for this XML key. The variables you can use with the
XML softkey URI are:
• $$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$
Format String
Default Value N/A
Range N/A
Example hardkey1 value: 123456+ (example of a speeddial prefix)
