9. Enter the IP address of the protocol server (in dotted decimal format).
Use the following table to configure the applicable server.
TFTP Settings
• Select Primary TFTP
• Enter the IP address or fully qualified domain name of the primary TFTP server.
• Press Done or Set to save the change.
• Select Pri TFTP Path.
• Enter the path name for which the configuration files reside on the TFTP server for downloading to the IP
Phone. If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative path
to that sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For
example, ipphone\6757i\configfiles.
• Optional: You can also configure an Alternate TFTP server and Alternate TFTP Path if required by selecting the
“Alternate TFTP” and the “Alt TFTP Path” parameters.
• From the TFTP Settings menu, select Alternate TFTP and press Enter.
• Enter the IP address or fully qualified domain name of the alternate TFTP server.
• Press Done or Set to save the change.
• Select Alt TFTP Path.
• Enter the path name for which the configuration files reside on the Alternate TFTP server for downloading to
the IP Phone. If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative
path to that sub-directory should be entered in this field. Enter the path name in the form
folderX\folderX\folderX. For example, ipphone\6757i\configfiles.
FTP Settings
• Select FTP Server.
• Enter the IP address or fully qualified domain name of the FTP server.
• Press Done or Set to save the change.
• Select FTP Path.
• Enter the path name for which the configuration files reside on the FTP server for downloading to the IP Phone.
If the IP phone’s files are located in a sub-directory beneath the server’s root directory, the relative path to that
sub-directory should be entered in this field. Enter the path name in the form folderX\folderX\folderX. For exam-
ple, ipphone\6757i\configfiles.
• Optional: You can enter a username and password for accessing the FTP server if required:
• Select FTP Username.
• Enter a username for accessing the FTP server.
• Press Done.
• Select FTP Password.
• Enter a password for accessing the FTP server.
• Press Done or Set.
