Filter
Top Products
MM23772, Rev. F
94
If system selection is programmed to the SYSTEM/GROUP/CHANNEL knob, direct
access to systems is not available. Press or to scroll through different sets of 16
systems each (banks) if more than 16 systems are programmed into the radio. The
systems within each bank are then selectable via the SYSTEM/GROUP/CHANNEL
knob as described previously in METHOD 1.
Example of Method 3:
System: 1 = North Group: 1 = Group 1
2 = South 2 = Group 2
3 = East 3 = Group 3
4 = West 4 = Group 4
1. Press
to enter System Select Mode.
2. Press
to select “West” system.
3. Press
. West is the newly selected system.
10.8 GROUP/CHANNEL SELECTION
Several methods can be used to select a new group or channel.
METHOD 1: From the control knob: If group selection is programmed to the SYSTEM/GROUP/
CHANNEL knob, select a group by turning the SYSTEM/GROUP/CHANNEL knob to
the desired group number position. The display registers the new group name on line two.
If the knob is moved to a position greater than the number of programmed groups, the
highest programmed group will remain selected. The
button can be programmed to
provide access to a “2
nd
bank” of 16 group number positions (17-32).
METHOD 2: (P7270, P7250, and P5250 model radios only) From keypad: If group selection is
programmed as the primary function of
and select a group by pressing or
to scroll through the group list. The display registers the new group name on line two.
METHOD 3:
(P7270 model radios only) Direct Access: Press
to enter the group select mode.
Press the numeric key mapped to the desired group. Press
. The radio will move to the
selected group.
METHOD 4:
(P7230 model radios only) If programmed for groups, press the
button to change
groups. The display registers the new group name on line two. If programmed fo
r
channels, press the button to change the channel. The display registers the new
channel.
10.9 MODIFY SCAN LIST
10.9.1 P7270 System Model
1. Press to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press
once to remove group or channel from list.