Filter
Top Products
MM23772, Rev. F
109
ICON DESCRIPTION
Steady (rotates clockwise) – Scan mode enabled.
If icon is not visible – Scan is disabled.
Steady – Channel Guard enabled.
If icon is not visible – Channel Guard is disabled.
T99 Mode enabled.
11.3 TRI-COLOR LED
Figure 11-5: Tri-Color LED
The Tri-Color LED changes color to indicate radio status and is visible from both the front and top of the
radio (see Figure 11-5). The three colors of the LED and the status they represent are:
Green:
Receiving
Red: Unencrypted transmission
11.4 STATUS MESSAGES
During radio operation, various radio Status Messages can be displayed. The messages are described
below.
MESSAGE
NAME DESCRIPTION
TALKARND
Talkaround Indicates the radio is operating on conventional channels in talkaround
mode (no repeater).
LOW BATT
Low
Battery
Battery voltage has dropped to the point to where the radio is no longer
able to transmit. The radio will still receive calls until the battery is
discharged beyond the point of operation at which time the radio will
automatically shutdown.
VOL=40
Volume
Level
Indicates the current volume level. The volume level display ranges from
OFF (silent) to 40 (loudest).
11.4.1 Error Messages
If either of the Error Messages shown below is displayed, the radio is programmed incorrectly or needs
servicing.
DSP ERR
ERR=XXXX
(PowerUp
only)
or
DIG V x
ERR x