Toshiba MEGF10K MP3 Player User Manual


 
58
/
Note
-When “PC CONNECTIONS” is set to “Windows Media Player 10” and a
connection has been made to the PC for the first time via the USB CRADLE,
“Found New Hardware wizard” may be displayed. Should this occur, please
insert the supplied CD-ROM into the CD-ROM drive of the PC. The required
driver will be installed automatically.
-The transferred tracks will be encrypted to the audio format for the gigabeat
(SAT file) in the same manner as when transferred using gigabeat room.
-All transferred tracks will be saved in the specified folder in the gigabeat. No
new folder will be created in the specified folder at the time of transfer.
-If a title name is specified in the tag of the transferred tracks, the title name will
be saved as the file name in the gigabeat.
-If a file of the same name as the transferred file already exists at the
destination, the existing file will be overwritten.
-WMA files with an attached license might not be transferable to the gigabeat
depending on the terms of the license.
-WMA/WAV files will be converted as follows when they are transferred to the
gigabeat.
Before transfer After transfer to the gigabeat
WMA Professional Converted to WMA CBR (32 to 160 kbps).
WMA Lossless Converted to WMA CBR (32 to 160 kbps).
WMA Voice Converted to WMA CBR (32 kbps).
WMA VBR When the average bit rate is 32 to 160 kbps:
Transferred directly
When the average bit rate is out of 32 to 160 kbps:
Converted to WMA CBR (32 to 160 kbps).
WAV (PCM) Converted to WMA CBR (32 to 160 kbps).