Filter
Top Products
90
TASCAM DR-60D
11 – Using the REMOTE jack
Using the footswitch
Press a pedal on the footswitch to operate the unit. The function of
each pedal corresponds to the assignment shown on the
REMOTE
screen.
Remote control (TASCAM RC-10)
Wired remote
control
TASCAM RC-10
(sold separately)
Setting the wired remote control
Make wired remote control settings on the
REMOTE
screen.
1. Press the MENU button to open the
MENU
screen.
2. Turn the DATA dial to select
OTHERS
, and press the DATA dial or
/ button to open the
OTHERS
screen.
3. Turn the DATA dial to select
REMOTE
, and press the DATA dial or
/ button to open the
REMOTE
screen.
4. Turn the DATA dial to select
CONTROLLER
, and press the DATA
dial or / button.
5. Turn the DATA dial to set
CONTROLLER
to
RC-10
(default value:
RC-3F
).
6. When finished making the setting, press the Stop (8) [HOME]
button to return to the Home Screen.
Using the wired remote control
Press the function buttons (F1 - F4) on the wired remote control to
use the function assigned on the
REMOTE
screen.
Overview of mode functions
MODES
Function buttons
F1 F2 F3 F4
- - - SLATE
Backlight
Always ON/
Backlight
OFF
MonitorSelect
+
MonitorSelect
−