Filter
Top Products
TASCAM DR-60D
37
3 – Preparation
3. Turn the DATA dial to select
DATE/TIME
, and press the DATA
dial or / button.
The
DATE/TIME
screen opens.
4. Press the DATA dial or the . and / buttons to move the
cursor, and turn the DATA dial to change the value.
5. Press the MENU button or . button to confirm the change
and return to the
OTHERS
screen.
NOTE
You can set the unit to automatically add the date to file names.
(See “Setting the format of file names” on page 88.)
CAUTION
•
The date and time setting can only be maintained for a few
minutes if the battery power becomes low and the unit is not
powered by a TASCAM PS-P515U AC adaptor (sold separately)
or USB cable. When using batteries, replace them before they
completely lose power.
Inserting and removing SD cards
Inserting the SD card
1. Open the SD card slot/USB port cover on the right side of the
unit.
2. Insert the SD Card into the slot as shown in the following illus-
tration until it clicks into place.
Removing the card
1. Open the SD card slot/USB port cover on the right side of the
unit.