Filter
Top Products
54
TASCAM DR-60D
4 – Recording
Dual recording file names
Dual recording allows two files to be recorded simultaneously. The
name of the second file created by dual recording has
DXX
added to
the file name of the ordinary recording.
DXX
shows the amount that
the input level has been lowered.
T
ASCAM_0002S12.WAV
T
ASCAM_0002S34D12.WAV
1: Set with the
WORD
item on the
FILE NAME
screen
2: Recording file base number
3:
S
is the source file
4: Assigned channels (
12
is channels 1/2 and
34
is channels 3/4)
5: This dual recording file was recorded with the input level set to
-12dB. (This would be
D06
if recorded at -6dB or
D10
if recorded
at -10dB, for example.)
Recording 4 channels
You can connect external mics or other equipment to record four
independent channels as two stereo recording files (channels 1/2
and 3/4).
Making 4-channel recording settings
1. Press the MENU button to open the
MENU
screen.
2. Turn the DATA dial to select
REC MODE
, and press the DATA dial
or / button to open the
REC MODE
screen.
3. Turn the DATA dial to select
REC MODE
, and press the DATA dial
or / button.
4. Turn the DATA dial to select
4CH
.
5. Press the DATA dial or . button to select the other item.
6. Turn the DATA dial to select
CH1/2 IN
, and press the DATA dial
or / button.
Set the CH1 and CH2 mic inputs.
Options:
STEREO
(default value),
CH1 MUTE
,
CH2 MUTE
7. Press the DATA dial or . button to select the other item.
8. When using mid-side mics, turn the DATA dial to select
MS
MODE 1/2
or
MS MODE 3/4
, and press the DATA dial or /
button.