44
TASCAM DR-60D
4 – Recording
Recording an external device (LINE IN)
Use stereo plug cables to connect to the output of an external audio
device.
Other audio equipment
or external sound source
CAUTION
•
Reduce the output level of the external audio device if the input
sound is distorted even when reducing the input gain level on the
unit.
•
When an external audio device with a fixed output line level is
connected, it would be impossible to control the gain level appro-
priately because of excessively large input signals. In such cases,
use the headphone jack or other level-controllable output for
connection to the unit.
Setting the input types
Set the 1/L and 2/R input switches on the front of the unit according
to the types of equipment connected to them.
LINE:
Use this setting when connecting line output jacks of external
devices to the analog inputs of this recorder.
MIC:
Use this setting when connecting mics to the recorder.
MIC+PHANTOM:
Use this setting when connecting condenser mics that require
phantom power (+24V or +48V) to the recorder.
When you set it to MIC+PHANTOM, a pop-up message appears
confirming that you want to turn phantom power on. (See “Using
phantom power” on page 45. )
Use the
SYSTEM
screen to set the voltage to +24V or +48V. (See
“Setting the phantom power voltage” on page 86. )