Tascam D01086320A MP3 Docking Station User Manual


 
34
TASCAM CD-200i
DIGITAL OUTPUT (COAXIAL) Terminal
ª
Connector: RCA Pin Jack
Compatible Signal Format: IEC-60958 Type II (S/PDIF)
Video Output
ª
Connector: RCA Pin Jack
Compatible Signal Format: Composite video signal
Output Impedance: 75Ω
S-VIDEO Output
ª
Connector: 4-pin mini-DIN connector
Compatible Signal Format: Separate video signal
Audio performance (CD playback)
Frequency Response: 20 Hz - 20 kHz ±1.5 dB
Signal-to-Noise Ratio (S/N): More than 90 dB (20 kHz LPF
+ A-weighted)
Dynamic Range: More than 90 dB (20 kHz LPF +
A-weighted)
Total Harmonic Distortion: Less than 0.01% (1 kHz, 20
kHz LPF)
Channel Separation: More than 90 dB (1 kHz, 1 kHz BPF)
Backup memory
The following settings are backed up even when the unit
power is turned off. “(CD)” means that the settings are
backed up when the output source is set to CD.
Time and title display settings (CD)
Playback mode (CD)
Program (for loaded CD)
Current folder (for loaded CD)
Output source setting
Repeat setting (CD)
Pitch control ON/OFF (CD)
Pitch control value (CD)
Ratings
Compatible disc formats
ª
CD-DA (12-cm/8-cm), CD-ROM (12-cm/8-cm) ISO 9660
LEVEL 1/2/ROMEO/JOLIET format (CD-R/CD-RW DISC
compatible)
Playable format
ª
Audio CD (CD-DA),
MPEG1 Audio Layer III (MP3)
WAV
MP3 playback specifications
ª
Audio Mode: STEREO/JOINT STEREO/DUAL
CHANNEL/MONO
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
Bit Rate: 32 kbps - 320 kbps, and VBR
WAV playback specifications
ª
Sampling Frequency: 8 kHz/11.025 kHz/12 kHz/16
kHz/22.05 kHz/24 kHz/32 kHz/44.1 kHz/48 kHz
Sampling Bit Rate: 8 bit/16 bit
Audio CD playback specifications
ª
Sampling Frequency: 44.1 kHz
Sampling Bit Rate: 16 bit
Number of Channels: 2
Input/Output ratings
AUX IN (UNBALANCED) Jack
ª
Connector: 3.5 mm stereo mini jack
Reference Input Level: –16 dBV
Maximum Input Level: 0 dBV
Input impedance: 22
ANALOG OUTPUT (UNBALANCED) Terminal
ª
Connector: RCA pin jack
CD Reference Output Level: –10 dBV
CD Maximum Output Level: +6 dBV
Output Impedance: 200Ω
PHONES Jack
ª
Connector: Standard Stereo Jack
Maximum Output Level: 20 mW + 20 mW
Load Impedance: 32Ω
DIGITAL OUTPUT (OPTICAL) Terminal
ª
Connector: Optical Jack
Compatible Signal Format: IEC-60958 Type II (S/PDIF)
8 − Specifications