Filter
Top Products
28
TASCAM CD-200i
4 − Playing Back CDs
Repeat playback
You can play a selected track or all tracks repeatedly.
Press the REPEAT (PITCH ON/OFF) key on the main
unit or the REPEAT key on the remote control to
select from one of the following repeat modes.
REPEAT (PITCH ON/OFF) key
REPEAT (PITCH ON/OFF) key
REPEAT key
Single repeat (REPEAT indicator appears):
The selected track is played back repeatedly.
All repeat (REPEAT and ALL indicators appear):
All tracks* are played back repeatedly.
When set to folder playback with a data CD, all tracks *
in the folder are repeated. When using programmed
playback, all tracks in the program are repeated.
Off (no indicator on the display):
Repeat playback is OFF.
Turning repeat playback OFF:
Press the REPEAT key on the main unit or the
remote control until the ALL and REPEAT indicators do
not appear.
If single repeat playback is turned ON during
•
playback, the current track is played back repeatedly.
If all repeat playback is turned ON during playback,
playback continues as it is until the end of the disc or
current folder is reached. Then, playback continues
from the beginning of the disc or current folder.
If repeat playback is turned ON when stopped,
repeat playback begins when the PLAY/READY key is
pushed.
The repeat function’s ON/OFF state is retained even
•
when the power is turned OFF.
During folder playback, REPEAT ALL plays back all
•
tracks inside the current folder repeatedly.
You can use the shuffle and the repeat at the same
•
time.
You can use the programmed playback and the
•
repeat at the same time.
You can change the setting of repeat playback
•
during playback.
Time and text information display
You can set what type of time and text information is shown
on the display.
Press the DISPLAY (SHIFT) key on the main unit or
the DISPLAY key on the remote control to show for
two seconds the type of information (playback time
or text information) that is currently set to appear
in the main area of the display. Press this key again
while this is being shown to change the type of infor-
mation displayed.
The contents that can be displayed differ depending on the
type of disc loaded, its status and the operation state of the
unit.
DISPLAY (SHIFT) key
DISPLAY key