Filter
Top Products
32
TASCAM CD-200i
Operation messages
The following messages are shown on the main display according to the operation of the CD player.
Message
Message
lit or blinking
Meaning Response
-CLEAR-
Lit All programs have been cleared.
CLOSE
Lit The disc tray is closing.
NO DISC
Lit There is no disc or the disc cannot be
verified.
NO FILES
Lit The disc has no files that can be played
back.
Load a disc that has MP3 or WAV
files.
NO NAME
Lit There is no artist data or no file data that
can be displayed
Text information must be 7-bit ASCII
compatible text to be displayed.
NO TITLE
Lit There is no title data that can be displayed. Text information must be 7-bit ASCII
compatible text to be displayed.
OPEN
Lit The disc tray is open.
TOC READ
Lit TOC information is being read.
NO IPOD
Lit No iPod is connected. Connect an iPod.
-IPOD-
Lit The output source is set to iPod.
-AUX-
Lit The output source is set to AUX.
Warning messages
If an operation cannot be completed, one of the following messages is shown. It will appear for about two seconds before
disappearing automatically.
Message
Message
lit or blinking
Meaning Response
NO PGM
Lit No program has been created. Add tracks to the program.
PGM FULL
Lit
You cannot add more than 99 tracks to the
program.
Either stop trying to add to the
program, clear the program, or
replace one of the tracks in the
program.
Error messages
If one of the following error messages is shown, please refer to the Response column and try to resolve it. If this does not
correct the problem, please contact a TEAC repair center.
Message
Message
lit or blinking
Meaning Response
COMM ERR
Blinking Cannot communicate with the CD drive. Contact a TEAC repair center.
COMM ERR
Lit
An error occurred during communication
with the CD drive.
Contact a TEAC repair center.
DEC ERR
Lit
The file type is not supported or otherwise
could not be played
Change the disc
DISC ERR
Lit
The TOC or file system could not be read,
or focus adjustment was not possible.
Clean or change the disc.
DRV ERR
Lit The CD drive hardware is broken. Contact a TEAC repair center.
READ ERR
Lit The track cannot be accessed. Clean or change the disc.
6 − Message Lists