Filter
Top Products
TASCAM CD-200i
23
4 − Playing Back CDs
Selecting a track
There are two ways to select a track. You can move (skip) to
the previous or next track, or you can select a track directly
by its track number.
Skipping to the next or previous track
Press a SEARCH Ô/ (Â/¯) key on the
main unit or a search (Ô/Â, ¯/) key on
the remote control.
After selecting the track, press the PLAY/READY key
on the main unit or the remote control to start track
playback.
SEARCH
Ô/
keys
SEARCH Ô/ keys
Selecting by track number
Use the numeric keys (0–9) on the remote control to directly
set a track for playback by number.
Track numbers can have up to two digits for audio CDs and
up to three digits for data CDs.
1 Use the remote control numeric keys (0–9) to input
the track number. Input the track number starting
with the first digit as in the example below.
Numeric keys
(0 - 9)
To select track 1:
ª
Press the “1” key one time.
To select track 12:
ª
Press the “1” key followed by the “2” key.
2 Press the PLAY/READY key on the main unit or the
remote control.
The selected track begins to play.
If you press the STOP key on the main unit or the
remote control, the display stops showing the track
number input and the display returns to its previous
state.
The numeric keys cannot be used to select a track when
in program or shuffle mode.