Tascam D01086320A MP3 Docking Station User Manual


 
30
TASCAM CD-200i
4 − Playing Back CDs
CAUTION
During playback, turning pitch control playback
ON or OFF might cause the playback sound to skip
momentarily.
Using pitch control playback with a data CD (MP3,
WAV) sometimes causes the playback sound to skip.
Digital output is possible when the pitch control
function is ON during playback of MP3 and WAV files
on audio CDs, but the sampling frequency is changed
by an amount proportional to the pitch control
value. When pitch control is ON, therefore, some
equipment might not be able to receive the digital
output signal from the CD-200i.
The pitch control function cannot be used with iPods.
Intro Check
During playback or when stopped, press and hold
the PLAY MODE/INTRO CHECK (SOURCE SEL) key
on the main unit or the INTRO CHECK key on the
remote control to playback only the first 10 seconds
of each track.
The INTRO indicator lights when this function is ON.
When Intro Check is ON, press and hold the PLAY
MODE/INTRO CHECK (SOURCE SEL) key on the
main unit or the INTRO CHECK key on the remote
control again to return to the continuous playback
mode and turn the INTRO indicator OFF.
PLAY MODE/INTRO CHECK
(SOURCE SEL) key
INTRO CHECK key
When using Intro Check, press the
SEARCH
Ô/ (Â/¯) keys on the main unit or the
search (Ô/Â, ¯/) keys on the remote con-
trol to skip to the preceding or next track.
Press the
STOP key to stop Intro Check.
The intro check function can be used with data CDs.
The intro check function can be used during program
and folder playback modes.
The intro check function cannot be used with iPods.