Filter
Top Products
66
VGF-WA1 3-094-116-11(1)
Problem Causes/measures
“The DC-IN voltage is too
high. Connect the specified
AC Adapter” appears, and the
device goes into standby
mode.
An AC adapter other than the supplied one may be plugged into this
device, so the power voltage is too high. Use the supplied AC adapter.
“The internal temperature
of the device is too high”
appears, and the device goes
to standby mode.
The device goes to standby
mode, no messages appear
on the display window, and
the POWER lamp flashes
on and off.
If you use this device at high-volume levels for a long time, the internal
temperature of this device may become too high. Turn off the device,
wait for a while until it cools down, and then turn on again.