Filter
Top Products
49
VGF-WA1 3-094-116-11(1)
Others
Top layer Second layer
Description
Server Settings
You can set to connect to a server automatically; and can delete a
server from the history list.
Server Auto Connect
You can set to connect to the last connected server automatically in PC
Streaming Function (page 32). (default: On)
Server Delete
(page 32)
Network
Settings
You can set how to connect to the server via wireless LAN, either with
the Wireless Adapter or with an access point (page 52).
Wireless Adapter (default)
Access Point
Options
You can change various settings.
Beep
You can set to beep or not to beep when a button is pressed. (default:
On)
Audio Out
You can set where to output the audio, the speakers or the LINE OUT
and OPTICAL OUT jacks.
Speaker (default)
Line/Optical
Notes
You cannot output the audio to both the speakers and the LINE OUT
and OPTICAL OUT jacks at the same time.
If headphones are plugged into this device, the audio is output to the
headphones regardless of this setting.
You cannot adjust the volume when [Line/Optical] is selected.
You may not be able to play some content when outputting to the
OPTICAL OUT jack.
When you output the audio to the OPTICAL OUT jack, you cannot
record the audio by using a recording device which has an optical input
jack (such as MD or DAT), as SCMS (Serial Copy Management System)
prevents the recording.
AUX Sensitivity
You can adjust the sensitivity of the AUX jack to match the output level
of the audio device connected to the AUX jack.
Normal (for connecting to a portable audio device, such as a
Walkman) (default)
Middle
Low (for connecting to a stereo component, etc.)
Note
You can change this setting only when you are in Auxiliary Function.
Backlight
You can set whether the backlight of the display window and control
panel always stays on or goes on/out automatically while this device is
turned on.
Auto On/Off - The backlight turns off automatically after 90
seconds elapses without operations. When the backlight is off, if you
stand in front of this device or operate it, the backlight lights up
automatically (default).
Always On - The backlight always stays on.
Notes
If the AC adapter is plugged into this device and it is in standby mode,
the backlight of the display window always stays on regardless of this
setting.
If the USB cable is plugged into this device, the backlight of the keys
stays off.