Filter
Top Products
56
VGF-WA1 3-094-116-11(1)
Notes
A Wireless Digital Audio does not appear in the
list in the following cases:
– It is not registered, and it is not turned on.
– It is turned on, but it is connected to another
Wireless Adapter.
– It is turned on, but the [Network Settings]
option is set to [Access Point].
All of the Wireless Digital Audios that are
indicated as [Connecting] are connected to the
same wireless LAN, so the strongest signal is
indicated on all of the Wireless Digital Audios.
Refreshing the Wireless Digital
Audio list
1
Click [Update].
The Wireless Digital Audio list is
refreshed.
After completing, the latest Wireless
Digital Audio list appears.
Registering a Wireless Digital
Audio
You can register an “unregistered” Wireless Digital
Audio. You can register up to five Wireless Digital
Audios.
After registering, the network setting of the
Wireless Digital Audio is performed.
1
Press the PC button of the desired
Wireless Digital Audio.
The Wireless Digital Audio starts in the
PC Streaming Function.
A string of 12 characters (symbols and
numbers) appears on the display window
of the Wireless Digital Audio.
2
Click [Update] on the computer
screen.
3
Click the desired Wireless Digital
Audio in the Wireless Digital Audio list.
A cursor appears on the clicked Wireless
Digital Audio.
4
Click [Register].
The network setting of the Wireless
Digital Audio is performed.
After completing, the status of the
registered Wireless Digital Audio changes
from [Unregistered] to [Connecting].
Tip
If the desired Wireless Digital Audio does not appear
on the list, follow the procedures below:
On the Wireless Digital Audio, press SETTINGS to
select [Network Settings] - [Wireless Adapter], and
then select [Yes] to initialize the network settings and
to set the [Network Settings] to [Wireless Adapter]
(page 52). And then, perform from step 2 again.
Resetting the registration
You can reset the Wireless Digital Audio
registration.
If you perform the registration reset, all the
Wireless Digital Audio registrations are reset.
1
Press the
(POWER) buttons on all of
the Wireless Digital Audios you want to
reset.
2
Click [Reset Registration] on the screen
of the computer.
All of the Wireless Digital Audio’s
registrations are reset.
After the registration reset, the latest list of
Wireless Digital Audios appears.