Filter
Top Products
52
VGF-WA1 3-094-116-11(1)
Wireless LAN settings
To connect this device to a computer via wireless
LAN, you need to configure the wireless LAN
settings of this device.
You can configure by using the Access Point
connection tool (page 54) to connect via an access
point.
Note
To configure the proxy server settings, use the
access point settings tool (page 54).
To connect via the Wireless
Adapter
1
Press SETTINGS.
2
Press / to select [Network
Settings], and then press ENTER.
3
Press / to select [Wireless
Adapter], and then press ENTER.
The settings initialization screen appears.
4
Press / to select [Yes] or [No], and
then press ENTER.
If you select [Yes], the Wireless Adapter
connection settings are initialized and this
device can connect to any Wireless
Adapter.
If you select [No], the Wireless Adapter
connection settings stay the same and this
device is able to connect to the same
Wireless Adapter as before.
The settings confirmation screen appears.
5
Press / to select [OK], and then
press ENTER.
[Network Settings] option is set to
[Wireless Adapter].
This device restarts automatically, and
waits for wireless LAN connection.
Note
If you select [Yes] in step 4, you cannot
connect to your Wireless Adapter anymore
unless you register again your Wireless
Digital Audio by using the Wireless Adapter
Manager (page 55).
To connect via an access point
1
Press SETTINGS.
2
Press / to select [Network
Settings], and then press ENTER.
3
Press / to select [Access Point],
and then press ENTER.
The settings initialization screen appears.
4
Press / to select [Yes] or [No], and
then press ENTER.
If you select [Yes], the network name
(SSID) input screen appears.
If you select [No], the setting confirmation
screen appears. Proceed to step 9.
5
Press
/
to enter the network
name, and then press ENTER.
You can enter a network name (SSID) of
up to 32 characters long (alphanumeric).
The security setting screen appears.