Filter
Top Products
69
Additional Information
Troubleshooting
CD Player
General
MD Player
Symptom
There is no audio.
The picture of your TV becomes
unstable.
Various indications appear in the
display one after another.
Noise is heard.
The CD does not play./“No Disc“
lights in the display even when a
CD is in place.
The sound drops out.
Noise is heard.
An incompletely inserted MD
cannot be pulled out.
"Disc Error" lights in the display and
the player does not operate.
“– – –:– –” appears in the display
instead of the playing time or the
remaining time.
Remedy
• Press POWER to turn on the player.
• Connect the AC power cord securely.
• Adjust the volume.
• Unplug the headphones from the i jack when
listening through speakers.
• Wait until “TOC Reading” disappears from the
display.
• Move the player away from the TV.
• The player is in the demonstration mode.
t Set the clock to exit the demonstration mode.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player. t Move the portable telephone, etc.,
away from the player.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Reduce the volume.
• Clean the CD, or replace it if the CD is
damaged.
• Place the player in a location free from
vibration.
• The sound may drop out or noise may be heard
if the CD is recorded using a personal computer
(CD-R, etc.)
• The MD player’s self-lock system has gripped
the MD. Insert the MD completely, then press
Z.
• Take the MD out and insert it again. If "Disc
Error" remains, replace the MD. Try erasing all
tracks on the MD (page 37).
• This player can display the time up to 159
minutes 59 seconds. If the time is longer than
this, it will be displayed as “– – –:– –”.
continued