Filter
Top Products
Recording
30
To pause recording
Press MD u (MD X on the remote). Press the button
again to resume recording.
Recording from a CD
Track marks on the source CD are recorded on the
same positions on the MD. Track marks are also
added automatically on the MD when you pause
recording.
If unnecessary track marks are added, erase them after
recording (see ”Combining recorded tracks” on page
41).
1 Insert a CD.
2 Press CD x to activate the CD player.
3 Insert a recordable MD.
4 Press REC/REC MODE (z on the remote).
The player stands by for recording.
5 Press MD u (MD N or MD X on the remote).
Recording will be made from the last recorded
position.
6 Press CD u.
To stop recording
Press MD x.
To pause recording
Press MD u (MD X on the remote). Press the button
again to resume recording.
Tip
When you record a
program of a station
whose name is labeled
on this player, the
station name is
recorded automatically
as the track name (up
to 50 names) (page 23).
Notes
• After
you stop recording,
do not disconnect the
AC power cord or
move the player
while “TOC EDIT” is
flashing in the
display. If you do so,
recording may not be
done properly.
• If you turn up the
volume too high,
sound skipping may
occur.
Tips
• To record over the
previous recording, see
page 33.
• To add track marks
during recording, press
REC/REC MODE
where you want to add
track marks.
• To add track marks
after recording, see
“Dividing recorded
tracks” on page 39.
Recording from the radio or a CD (continued)