Filter
Top Products
Recording
31
Recording
Extending the
recording time
(Monaural recording)
If you choose to record in
monaural, the recording time
becomes double the normal mode;
however, the recorded sound will
lose the real sound presence to
some extent. Choose the recording
mode accordingly.
LINE/LINE LEVEL
1 Prepare the music source you want to record.
Source Do this
CD Insert a CD, and press CD x.
RADIO Tune in the station.
LINE Turn on the component connected to
LINE IN.
Press LINE/LINE LEVEL until
“LINE” appears in the display.
2 Insert a recordable MD.
3 Press and hold REC/REC MODE until “Stereo
REC” flashes in the display.
4 Press > or . until “Mono REC” flashes in the
display, and press YES•ENTER.
The player stands by for recording.
5 Press MD u (MD N or MD X on the remote).
Recording will be made from the last recorded
position.
6 Play the sound source.
Recording from the CD: Play the CD.
Recording from the connected equipment : Play
the component connected to the LINE IN jack.
REC/REC MODE
Notes
• After
you stop recording,
do not disconnect the
AC power cord or
move the player
while “TOC EDIT” is
flashing in the
display. If you do so,
recording may not be
done properly.
• While recording from
radio, you cannot
change the station.
• If you turn up the
volume too high,
sound skipping may
occur.
Tips
• To record over the
previous recording, see
page 33.
• To add track marks
during recording, press
REC/REC MODE where
you want to add track
marks.
• To add track marks
after recording, see
“Dividing recorded
tracks” on page 39.
MD u >, .
continued