Filter
Top Products
Editing recorded tracks on the MD
34
On the MD, track marks are inserted
between the tracks. You can find the
beginning of the tracks quickly using the
track marks. You can change the
positions of the track marks. For
instance, you can divide a certain track
into several tracks by adding track
marks. You can also combine some
tracks into a new longer track by erasing
some track marks.
The position of the track marks to be
added are different depending on the
type of recording or recording
conditions
The type of
recording
Recording a whole
CD (page 6)
Recording from a
CD using REC/
REC MODE button
(page 30)
Recording from the
radio or other
equipment
connected to the
player (pages 29
and 61)
You can add or erase track marks after
recording. When you record, for
instance, from a radio or other
equipment connected to the player, track
marks may be added to the positions
you do not want. If that happens,
change the positions of the track marks
to those you want.
Change the track marks correctly
• To erase a track mark t “Combining
recorded tracks (Combine Function)”
(page 41): You can combine two tracks
into a single one by erasing the track
mark between the two tracks.
• To add a track mark t “Dividing
recorded tracks (Divide Function)”
(page 39): You can divide one track
into two tracks by adding a track
mark.
The position of the
track marks to be
added
The same positions on
the source CD
•The same positions on
the source CD
•The position where
you pause recording
•The position where
you press REC/REC
MODE
•When there is no
sound input or a soft
sound continues
during recording for
more than 2 seconds
•The positions where
you pause recording
•The positions where
you press REC/REC
MODE
Before editing
Editing recorded tracks on the MD