Filter
Top Products
The Timer
55
The Timer
Timer-recording
radio programs
You can set timer to record the radio at a
certain time. You can also record from the
component connected to the LINE IN jack
of the player.
Make sure you have set the clock (see
“Setting the clock” on page 50).
Before you begin, make sure “TIMER” is not
displayed. If displayed, press STANDBY.
1 Tune in the radio station and insert an MD.
2 Press TIMER.
“TIMER” flashes in the
display.
Make the following settings by checking the
indications in the display.
3 Press > or . until “Stereo REC” or “Mono
REC” flashes in the display, and press
YES•ENTER.
4 Press > or . until “RADIO” flashes in the
display, and press YES•ENTER.
When recording from the component connected to
the LINE IN jack of the player, press > or .
until “LINE” flashes in the display, and press
YES•ENTER.
Notes
• You cannot preset
recording timer and
waking up timer (page
52) at the same time.
• When recording from
the component
connected to the LINE
IN jack of the player,
refer to the operating
instructions of the
component.
STANDBY TIMER
YES
ENTER
>, .
Number/
character
buttons
continued