Filter
Top Products
17
Basic Operations
4 Attach your Network Walkman to the USB cradle or the recording USB cradle.
“CONNECT” is indicated in the Network Walkman display, and the access lamp blinks while accessing the
computer.
Note
Be sure to attach your Network Walkman in the arrow direction as illustrated.
NW-MS70D/MS90D
NW-MS77DR
Notes
• The access lamp blinks while your Network Walkman accesses the computer.
• Do not disconnect the USB cable or remove your Network Walkman from the USB cradle or the recording USB
cradle when the access lamp is blinking. The data being transferred may be destroyed.
• Use of your Network Walkman with a USB hub or a USB extension cable is not guaranteed. Always connect your
Network Walkman to the computer directly using the dedicated USB cable.
• Some USB devices connected to the computer may interfere with the proper operation of your Network Walkman.
• The control buttons on your Network Walkman are all disabled while it is connected to a computer. If you attach
your Network Walkman to the USB cradle or the recording USB cradle connected to the computer during
playback, playback stops and “CONNECT” appears in the Network Walkman display.
• You can display the data stored in the built-in flash memory using Windows Explorer when your Network
Walkman is connected to the computer. However, in case “Memory Stick” is inserted into the slot, the data stored
in “Memory Stick” will be displayed.
USB cradle connector
Access lamp
USB cradle
USB cradle
connector
Access lamp
Recording
USB cradle
continued