Filter
Top Products
35
Notes
• When charging the batteries using the charging
stand, be sure to remove the external battery case.
• During charging, the CD player and the
rechargeable batteries become hot. This poses no
danger.
• If you push the 5-way control key toward u
lever during charging, charging stops and
playback of the CD starts.
• If you place the CD player on the charging stand
during play, play stops and charging starts.
• Place the CD player on the charging stand
securely, aligning the V mark on the CD player
with the v mark on the stand. Make sure that the
OPR lamp on the CD player lights up. Wrong
placement interrupts charging or play.
To remove the rechargeable batteries
Push # end to remove the batteries.
When to replace the rechargeable
batteries
If the battery life becomes shorter by about
half, replace the batteries with new
rechargeable batteries.
Note on the rechargeable batteries
If the batteries are new or have not been used
for a long time, they may not be charged
completely. In that case, charge them until
the OPR lamp goes off and then use the CD
player until the batteries are depleted
completely (“Lobatt” appears in the display).
Repeat this procedure several times.
Align
Connecting to a power source
Note on carrying the rechargeable
batteries
Use the supplied battery carrying case to
prevent unexpected heat. If the rechargeable
batteries and the metallic objects are
contacted, heat or fire may occur due to a
short circuit.
Using the dry batteries
You can extend power by inserting
rechargeable batteries in the CD player and
attaching the external battery case.
1
Align the lines below PUSH as
illustrated, then draw out the
battery case while pressing PUSH.
2
Insert two LR6 (size AA) alkaline
batteries (not supplied) by
matching the 3 to the diagram in
the battery case. Insert the battery
case and lock the case by turning
LOCK in the direction of the
arrow.
(Continued)