Filter
Top Products
34
Using the rechargeable batteries
3
Connect the AC power adaptor to
the DC IN 4.5 V jack of the
supplied charging stand and an
AC outlet. Then place the CD
player on the supplied charging
stand, aligning the V mark on the
CD player with the v mark on the
stand.
Charging of the batteries starts.
In the display of the remote control,
“Charging” indication flashes and the
indicator sections of light up in
succession. The OPR lamp lights up on
the CD player.
When the batteries is completely
charged, all indications on the display
disappear and the OPR lamp goes off.
OPR lamp
to an AC outlet
Notes on the supplied charging stand
• The supplied charging stand can be used
only with this CD player. No other model
can be charged using this stand.
• When using the supplied charging stand,
charge the NH-10WM rechargeable
batteries only. Do not charge any other
batteries.
• During charging, the CD player and the
rechargeable batteries become hot. This
poses no danger.
• Do not place coins or other metallic
objects on the charging stand. If the
terminal on the charging stand is
accidentally brought into contact with a
metallic object, it may short-circuit and
begin to heat up.
To charge the rechargeable batteries
without using the supplied charging
stand
Connect the AC power adaptor to the EXT
BATT/DC IN 4.5 V jack of your CD player
and an AC outlet, then push the 5-way
control key toward x/CHG.
Charging starts.
AC power adaptor
to DC IN 4.5 V of the charging stand
Align V
with v.
to an AC outlet
OPR lamp
AC power adaptor
5-way control
key (x/CHG)
to EXT BATT/
DC IN 4.5 V