Filter
Top Products
27
If you select “G-PRO 2,” the G-
PROTECTION function will be
enhanced compared to “G-PRO 1.” To
enjoy high quality CD sound, select “G-
PRO 1.”
Note
Sound may skip:
– if the CD player receives stronger continuous
shock than expected,
– if a dirty or scratched CD is played, or
– when using poor-quality CD-Rs/RWs or
if there is a problem with the original recording
device or application software.
Protecting your hearing
(AVLS)
The AVLS (Automatic Volume Limiter
System) function keeps the maximum
volume down to protect your hearing.
1
Press DISPLAY until the display
changes. (CD player : Press
DISPLAY/MENU until the MENU
screen appears. Press F or f to
select “OPTION,” then press
DISPLAY/MENU.)
2
Flick the jog lever toward . or
> to select “AVLS,” then press
the jog lever to enter the selection.
(CD player: Press F or f to select
“AVLS,” then press DISPLAY/
MENU to enter the selection.)
3
Flick the jog lever toward . or
> to select “ON,” then press the
jog lever to enter the selection.
(CD player: Press F or f to select
“ON,” then press DISPLAY/MENU
to enter the selection.)
To cancel the AVLS function
Perform steps 1 - 3, changing the AVLS
setting to “OFF.”
Stopping playback
automatically
(OFF TIMER)
You can set the CD player to stop the play
automatically within a range of 1 to 99
minutes. While the timer function is
working, the following indications appear:
• CD player: “ ” appears at about 5-second
intervals.
• Remote control: “,” is displayed.
1
Press DISPLAY until the display
changes. (CD player: Press
DISPLAY/MENU until the MENU
screen appears. Press F or f to
select “OPTION,” then press
DISPLAY/MENU.)
2
Flick the jog lever toward . or
> to select “TIMER,” then press
the jog lever to enter the
selection. (CD player: Press F or
f to select “TIMER,” then press
DISPLAY/MENU to enter the
selection.)
3
Flick the jog lever toward . or
> to select “10 min*”. (CD
player: Press F or f to select “10
min,” then press DISPLAY/MENU.)
* Default setting. If you have changed the
setting, the length of time already set
appears.
Available features
(Continued)