Filter
Top Products
26
Plug cover
Adaptor
Attaching the plug cover to the supplied extension
headphone cord
The extension headphone cord is convenient when
your Network Walkman is in your pocket or
carrying bag.
1 Slip the headphone plug of the extension cord into the
plug cover.
2 Attach the adaptor to the headphone cord, and slide
the adaptor into the plug cover completely.
3 Slide the headphone plug into the plug cover
completely.
4 Connect the headphone plug together with the plug
cover to the headphone jack.
5 Connect the extension cord to the headphone.
Note
Do not pull the headphone cord when you connect/
disconnect the headphones to/from your Network
Walkman or attach/remove the plug cover to/from the
headphone cord. It may cause the wire to break.
Connect the headphone plug to the
headphone jack of your Network
Walkman with the (a) marks aligned with
one another, and rotate the plug cover
clockwise until it clicks into place.
If the headphone plug is not fully
connected to the headphone jack, the plug
cover may come loose.
Listening to music with your Network Walkman (continued)