Filter
Top Products
4.2 Mounting 6
Figure 1: Neon board
4.2 Mounting
The Neon
R
board measures 2.75” by 6.75”, s lightly larger than the Hitachi
R
6.2” display, to allow for easy mounting.
There are four mounting holes 1/4” from each edge in each of the four
corners, and the holes are 1/8” in diameter.
4.3 Connector reference
The following is a list of all connector part numbers used on the Neon
R
platform for use in identifying mating parts for your application. Note that
Boundary Deviceswill periodically switch vendors for these parts, but will
notify you of any changes that require a new mating part.
December 28, 2005 Revision 2.8