Filter
Top Products
7.5 Ethernet MAC Addresses 43
7.5 Ethernet MAC Addresses
Normally, Neon boards come with their MAC addresses pre-programmed
during assembly and test. This is done by using the U-Boot mac command
as shown below.
Invoked without an argument, the command will display the current
MAC address. Used with a single parameter (MAC address with colons
separating each pair of hex digits), the command will allow (re)programming
of the MAC address.
$ mac
mac address ff:ff:ff:ff:ff:ff
$ mac 00:50:c2:06:30:b8
setting mac address to 00:50:c2:06:30:b8
done
December 28, 2005 Revision 2.8