Filter
Top Products
7.1 Display configuration 39
$ set panel hitachi_wvga
$ save
Saving Environment to Flash...
Un-Protected 1 sectors
Erasing Flash...
Erased 1 sectors
Writing to Flash... done
Protected 1 sectors
$ reset
resetting ...
$S00#b3
Reset A0008000
U-Boot 1.1.2 (Jun 10 2005 - 22:31:50)
U-Boot code: A1F00000 -> A1F20500 BSS: -> A1F54520
RAM Configuration:
Bank #0: a0000000 64 MB
Flash: 32 MB
panel hitachi_wvga found: 800 x 480
...
7.1.4 Define and test a new display
If you add a plus sign to the lcdp command line, you’ll be prompted for all
of the parameters needed to define a display.
$ lcdp +
name: myDisplay
pixclock: 65000000
xres: 800
yres: 600
act_high: 1
hsync_len: 200
left_margin: 24
right_margin: 161
vsync_len: 6
upper_margin: 4
lower_margin: 29
active (0|1) : 1
------------------------------------
name : myDisplay
December 28, 2005 Revision 2.8